Last Number Redial List; Opening Lists With The Message Key - Siemens Gigaset S645 Operating Instructions Manual

Using the directory and lists on the handset

Last number redial list

The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again.
The number is dialled.
When a name appears, you can have the
corresponding number displayed by press-
ing the display key
§View§
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
v
Open menu.
The following functions can be selected
with q:
Automatic Redial
The number is selected automatically
at fixed intervals (at least every
50 sec.). The "Open listening" hands-
free key is activated.
– The call is answered: Press the talk
key c. The function is ended.
– The call is not answered: The call
rings off after about 30 sec..
The function ends after pressing any
key or ten unsuccessful attempts.
(page 21)
Display Number
Copy to Directory
Transferring an entry to the directory
(page 22).
(page 21)
Delete Entry
(page 21)
Delete List
24
.
Opening lists with the
message key
You can use the message key f to open
the following lists:
u
SMS list
Several lists are displayed (page 33) if
several mailboxes are set up.
u
Answering machine list or message
lists of the activated mailboxes
(page 37)
u
Answering machine/mailbox
If your network provider supports this
function and the T-NetBox is set for fast
access (page 44).
u
Calls list
An advisory tone sounds as soon as a new
message arrives on a list. The message
key f flashes. An icon appears in the
display for the new message in the idle
status:
icon New message...
Ã
... in answering machine list or T-
NetBox
Á
... in calls list
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
You call the lists containing the new mes-
sages when you press the flashing
f key.
The f key stops flashing after opening
a list and exiting the menu. If other new
entries are available you can set the mes-
sage key flashing again (page 25), e.g. to
notify other users about the new entries.