To Remove Usb Memory Device - Sharp XL-UR230H Operation Manual

XL-UR230H
XL-UR250H
Listening to USB mass storage device /
XL-UR2110H
MP3 Player (continued)
ENGLISH
2
Press the FOLDER button, and press the TUNING (
button to select desired playback folder.
FOLDER indicator
FOLDER number
To start playback with folder mode on, go to step 4.
To change the playback folder, press the TUNING (
button to select another folder.
3
Select desired file to be played back by pressing the
button.
4
Press the /
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
File Name Display
Function Display
( )
Clock Display
( ) Only appears when clock is already set.
Note:
To pause playback:
Press the USB button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
E-21
Total files in Folder 2
(USB / ) button.
( •TITLE-1 Indicator
( •TITLE-2 Indicator
( •TITLE-3 Indicator

To remove USB memory device

1
Press the USB
or )
USB
displayed.
2
Disconnect USB memory device from the USB terminal.
or )
or
Notes:
Title Display
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
Artist Display
This USB memory's format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
USB cable is not recommended for use in this audio system to
connect to USB memory device. Use of the USB cable will
Album Display
affect the performance of this audio system.
This USB memory cannot be operated via USB hub.
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
External HDD-storage cannot be played back via USB terminal.
If the data inside the USB memory is large, it may take longer time
for the data to be read.
button to stop playback. Then press the
button again and wait until "UNPLUG OK" is