Timer And Sleep Operation (Remote Control Only); Radio - Sharp XL-UR230H Operation Manual

Timer and sleep operation (Remote Control only)

Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
AUX) at a preset time.
Timer recording:
The unit turns on and starts recording from the desired source
(TUNER, AUX) at the preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a
radio station.
Daily timer: Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1 Set the daily timer (pages 32 - 34).
2 Set the once timer (pages 32 - 34).
1 minute or more
Daily timer
Start Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Once timer
Start Stop
Timer playback or timer recording
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 11).
If it is not set, you cannot use the timer function.
2 For timer playback: Plug in USB or load discs to be played.
For timer recording: Plug in USB for recording in the USB
terminal.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
XL-UR230H
XL-UR250H
XL-UR2110H
ENGLISH
or button to select
Continued to the next page
E-32