Listening To Usb Mass Storage Device/Mp3 Player; To Remove Usb Memory Device - Sharp XL-E12H Operation Manual

Listening to a CD or MP3/WMA disc (continued)
2
Press the PRESET (
desired folder, a then press the
remote control to select the desired track.
Selected track number
3
Press the MEMORY button to save the track number.

Listening to USB mass storage device/MP3 player

Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■ To play back USB/MP3 player
1
Press the FUNCTION button repeatedly to select USB
function. Connect the USB memory device that has
MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Select desired file to be played back by pressing the
or button.
3
Press the / button. Playback will start.
●
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Note:
To pause playback:
Press the / button.
or ) button to select the
or button on the
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.
5
Press the / button to start playback.
6
During programmed playback, press the
stop programmed playback.
Notes:
●
When a disc is ejected, the programme is automatically
cancelled.
●
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
●
During the programme operation, random play is not
possible.
The following functions are the same as CD operation:
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Note:
If USB memory device is not connected, "NO MEDIA" will
be shown on the display.

■ To remove USB memory device

1
Press the button to stop playback.
2
Press the button again and wait until "OK"
displayed.
3
Disconnect USB memory device from the USB terminal.
Notes:
●
SHARP will not be held liable for the loss of data whilst the
USB memory device is connected to the audio system.
●
Files compressed in MP3 and/or WMA format can be played
back when connected to the USB terminal.
●
This USB memory's format supports FAT 16 or FAT 32.
●
SHARP cannot guarantee that all USB memory devices will
work on this audio system.
●
USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable will
affect the performance of this audio system.
●
This USB memory cannot be operated via USB hub.
●
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
●
External HDD-storage cannot be played back via USB
terminal.
●
If the data inside the USB memory is large, it may take longer
time for the data to be read.
E-7
button to
Page
is