To Remove Usb Memory Device; Listening To Sd Mass Storage Device / Mp3 Player - Sharp XL-UR5H Operation Manual

To remove USB memory device

XL-UR5H
ENGLISH
1
Press the STOP
on the main unit.
2
Disconnect USB memory device from the USB terminal.
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory's format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
USB cable are not recommended for use in this audio system as
connection to USB memory device. Use of the USB cable will
affect the performance of this audio system.
This USB memory cannot be operated via USB hub.
If "NO SONG" is displayed, it means "Copyright protected WMA
file" or "Not supported playback file" is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
External storage devices cannot be played back using the USB
terminal on this unit.
E-21
button on the remote control or
Listening to SD mass storage
device / MP3 player
button
Note:
This product is not compatible with MTP and AAC file systems.
1
Press the USB/SD
Connect the SD memory device that has MP3/WMA format
files on the unit.
To select USB or SD function, press and hold the USB/SD
button for more than 2 seconds.
When the SD memory is connected to the main unit, the device
information will be displayed.
USB indicator
Total number of folders
In case in folder mode, proceed to step 2.
In case track is selected, proceed to step 3.
/ button, and push up the USB door.
SD indicator
WMA MP3 USB
Total number of tracks
/