Atw Masking (Masking For Atw) - Sanyo VCC-WD8574 Instruction Manual

Adjusting White Balance

ATW MASKING (Masking for ATW)

1 1
1 1
Select an area to be masked and specify "ON".
RMasking will be applied for the area specified with "ON".
• You can specify multiple masks. Repeat the above steps as
required.
• To disable the mask, select the area and specify "OFF".
35
English
ATW MASKING
TOP OFF
BOTTOM OFF
LEFT OFF
RIGHT OFF
CENTER OFF
PRESET OFF
MENU BACK
TOP
LEFT CENTER RIGHT
BOTTOM
2 2
2 2
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
MEMO: • You can get an appropriate white balance by masking
an extremely bright light source or dark location.
[Settings Screen]
• While setting the area, the masking is shown but is not
visible on the monitor screen.
[Monitor Screen]