Sanyo VCC-WD8574 Instruction Manual page 40

Specifying Alarm Input
3 3 3 3
Select "MASKING" and specify "ON" and press
the SET button.
MASKING
SENSITIVITY
DURATION
PRESET
MENU
RThe "MOTION MASKING" screen appears.
MEMO: Apply masking to what should not be motion-detected;
e.g., frequently moving objects such as trees swaying in
the wind as well as flickering.
39
English
MOTION SETTING
ON
SET
5S
OFF
BACK
4 4 4 4
Select a masking area and specify "ON".
SET
RMasking will be applied for the area specified with "ON".
• You can specify multiple masks. Repeat this step as required.
• To disable the mask, select the area and specify "OFF".
• The position and size for each area are common to those used
for "CENT" (BLC SETTEING). (See page 23)
5 5 5 5
Set "MENU" to "BACK" and press the SET
button.
RReturns to the "MOTION SETTING" screen.
MOTION MASKING
TOP ON
BOTTOM OFF
LEFT OFF
RIGHT OFF
CENTER OFF
PRESET OFF
MENU BACK
SET