Connecting Alarm Devices - Sanyo VCC-WD8574 Instruction Manual

Connecting Alarm Devices

1 1
1 1
Connect the unit with External Alarm or Beeper.
2 2 2 2
Attach the supplied core to the connecting cables as illustrated.
External Beeper or Indicator
ALARM
COM COM
OUT IN
Note: For alarm device connection, configure an alarm setting for this unit.
See pages 38 and 44.
Make a loop of the cables as close to the terminal as possible, so that the cables should go
through the core twice.
Core
Connecting Devices
External Alarm Switch or IR Sensor
10
English