Table of Contents
Advertisement
USING THE MENU SCREEN
WHITE BALANCE setting
The following three types of white balance adjustment can be carried
out.
A
Automatic color temperature tracking (ATW: Auto Trace
White balance)
This makes adjustments automatically so that the same colors can
be obtained even if the illumination level changes.
B
Push-lock white balance (AWC: Auto White balance Control)
One-push automatic white balance setting is possible. This is used
mainly when the ATW setting does not reproduce faithful colors.
Refer to page 30.
C
Manual white balance (MWB)
This lets you make fine adjustments to the color as desired. It can
be used when the optimum color reproduction cannot be
obtained by using ATW. Refer to page 31.
27
English
Automatic color temperature tracking setting
A
(ATW)
1
Press the SET button for about 3 seconds.
The MAIN MENU screen will be displayed.
2
Press the CURSOR (l, then d or c) button to change the
WHITE BALANCE setting to "ATW" (the setting will flash).
3
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the
bottom of the screen. Then press the CURSOR (d or c) button to
change BACK to END, and press the SET button.
To return to the previous screen, select BACK then press
the SET button.
SET
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
IRIS
CURSOR
WHITE BALANCE
CURSOR
SET
MENU
MENU
WHITE BALANCE/ATW
SET
p
OFF
INT
AI
p
ATW
p
BACK
END
Advertisement
Table of Contents
