Sanyo VCC-WD8574 Instruction Manual page 53

To lock (protect) the settings:
1 1 1 1
Select "PASSWORD LOCK" – "OFF" and press
the SET button.
PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE SET
MASK SET
MENU
RThe "PASSWORD" screen appears.
MEMO: • You must enter the valid password before you can lock
the settings using a password.
• "1234" is a factory-preset password; you are
recommended to change it to your own password.
(See page 53)
Hiding Partial Image (Privacy Protection)
OFF
SET
SET
BACK
2 2 2 2
Enter the password (4 numerical values) and
press the SET button.
Select Move
number. cursor.
MENU
• Enter "1234".
RIf you enter a valid password, you will see the "OK" message
and the "BACK" blinks.
Note: If you enter an incorrect password, you will see the "NG"
message. If you fail to enter the valid password three
times successively, the prompt display will disappear and
"BACK" will blink. Press the SET button to return to the
"PRIVACY MASK SETTING" screen.
3 3 3 3
Press the SET button.
RReturns to the "PRIVACY MASK SETTING" screen, and "ON"
will blink next to "PASSWORD LOCK".
MEMO: To disable the password lock, select "ON" and press the
SET button, and then enter the password.
PASSWORD
1234 SET
SET
BACK
English
52