Alarm Sign (Alarm Display) - Sanyo VCC-WD8574 Instruction Manual

Specifying Alarm Output

ALARM SIGN (Alarm display)

1 1
1 1
Select "ALARM SIGN" on the "ALARM SETTING"
screen and specify a displaying time.
• Select from: OFF (not display), 5S, 10S, 15S, 20S, 30S, 1M,
2M, 3M, 4M or 5M (S = second, M = minute)
RIf you specify any value other than "OFF", the camera name on
the screen will blink for the specified time of duration when an
alarm occurs.
Alarm occurred
MEMO: • If the camera name is not given, "??..." will blink on the
screen.
• Even if the "TITLE" is specified as "OFF", the camera
name will blink when an alarm occurs.
(See page 16)
45
English
ALARM SETTING
ALARM IN SET
ALARM OUT OFF
ALARM SIGN OFF
PRESET OFF
MENU BACK
CAM1
2 2
2 2
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.