Sanyo VCC-WD8574 Instruction Manual page 41

6 6 6 6
Select "SENSITIVITY" – "SET" and press the SET
button.
MOTION SETTING
MASKING
SENSITIVITY
DURATION
PRESET
MENU
RThe "SENSITIVITY" screen appears.
7 7 7 7
Select "MOVE" and specify a sensitivity level
(1 – 10).
MOVE
Y-DIFFER
Y-LEVEL
TIME
TEST
PRESET
MENU
RThe greater the number, the lower the responsiveness to
movement becomes.
OFF
SET
5S
SET
OFF
BACK
SENSITIVITY
5
ú
5
ú
5
ú
1
ú
OFF
OFF
BACK
8 8 8 8
Select "Y-DIFFER" and specify a luminance
difference level (1 – 10).
• The greater the number, the lower the responsiveness to the
brightness variation, such as lighting on or off conditions.
9 9
9 9
Select "Y-LEVEL" and specify a luminance level
(1 – 10).
• If false alarms occur very frequently because of noise in dark
screens, increase the value.
F F F F
Select "TIME" and specify a detection time of
duration (1 – 60).
• The greater the number, the lower the detectability against
fast-moving subjects.
G G G G
Set "TEST" to "ON".
• You can test the sensitivity of the motion detection. When any
motion is detected, the character color will turn into red on the
screen.
SET
H H H H
Set "MENU" to "BACK" and press the SET
button.
RReturns to the "MOTION SETTING" screen.
Specifying Alarm Input
40
English