Table of Contents
Advertisement
First steps
To connect the USB cable or change the battery open the battery cover:
¤
Remove the belt clip (if
attached).
¤
Place a coin into the notch at
the bottom of the casing and
pull the battery cover
upwards.
To change the battery, place a
coin in the cavity in the casing
and pull the battery upwards.
Attaching/removing the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – Press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage the notches.
¤
To remove – Using your right
thumb, apply pressure to the
center right of the belt clip,
push the fingernail of your left
index finger between the clip
and the casing, and lift the clip
upwards.
12
Advertisement
Table of Contents
