Table of Contents
Advertisement
Placing the handset in the charging cradle
¤
Insert the power adapter of the charging cradle into the electrical outlet.
¤
Place the handset in the charging cradle, with its display facing forward.
The handset is registered with the base station at the factory. You do not need
to complete a registration. To use a different base station or use additional
handsets with your base station, register the devices manually (
To charge the battery, leave the handset in the charging cradle.
First battery charge and discharge
The correct charge status can only be displayed if the battery is first fully
charged and then discharged.
Please note
u
After the first battery charge and discharge, you can place your handset
in the charging cradle after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert it.
u
The battery may heat up during charging. This is not dangerous.
¤
Place the handset in the charging cradle for
at least six (6) hours.
¤
6 h
First steps
¢
page 44).
Once the battery is fully
charged, remove the
handset from the charging
cradle and do not put it
back again until the bat-
tery is fully discharged.
13
Advertisement
Table of Contents
