Smeg Oven User Manual page 11

Running a grill program
From the OFF status:
1. Turn the knob to
the grill programs. The display will show
the parameters of the selected program
in rotation.
2. Press , the appliance will start the
grill cooking cycle and the display will
show the time remaining (in minutes)
preceded by the flashing text
During the last minute of cooking,
only the countdown of the
remaining 60 seconds will be
displayed.
3. At the end, a beep and the text
flashing (for 20 minutes) will
indicate that cooking has been
completed.
Extending a cooking operation
When a cooking operation finishes, it is
possible to extend it manually:
1. While the display is showing the text
, press
will appear on the display.
2. Turn the knob to
additional minutes of cooking.
At most 20 extra minutes are
allowed.
3. To start cooking with the extra time that
has just been set, press
2 seconds. A beep will indicate that
cooking has resumed.
/ to select one of
; the text
/ to set the
for at least
Use
4. At the end of cooking, the text
will continue to flash for the next 20
minutes and the oven light will remain on.
The fan keeps turning until
pressed.
Modifying a program during cooking
Changes made to the program
during cooking are not saved.
.
During cooking you can modify the
parameters set for the program:
1. Press the knob, the display will show the
cooking temperature.
2. Modify the settings as described in "
Editing / saving a thermo-ventilated
program" or " Editing / saving a grill
program".
3. 3 seconds after the last change, the
program automatically quits the
modification status and saves the settings
(the modified parameters are saved
solely until the end of cooking).
is
35