Smeg Oven User Manual page 10

Editing / saving a grill program
1. Turn the knob to
program you wish to save or edit.
2. Hold the knob down for 3 seconds: the
display will show the cooking time.
3. Turn the knob to
cooking time (from 1 to 30 minutes).
4. Press the knob to exit from the data
setting and saving phase. The message
will appear on the display and
the parameters will be saved.
The grill function is set at a grilling
temperature of approximately
290°C. This temperature cannot
be changed by the user.
Grilling can only take place with
the oven door closed: opening the
door deactivates the heating
elements.
34
/ to select the
/ to set the
Use
Running a thermo-ventilated program
From the OFF status:
1. Turn the knob to
the thermo-ventilated programs. The
display will show the parameters of the
selected program in rotation.
2. Press button
perform a preheating cycle, the text
will appear on the display.
3. When preheating is finished, a series of
beeps lasting 3 seconds will indicate that
it is possible to proceed with the cooking
operation. The text
the display.
4. To start cooking, hold button
down for 2 seconds. The display will
show the set parameters in sequence,
with the time remaining until the end of
cooking and the program selected.
It is possible to start cooking early
before the preheating temperature
is reached, by holding
down for 3 seconds.
5. During the last minute of cooking, only
the countdown of the remaining 60
seconds will be displayed. At the end, a
beep and the text
20 minutes) will indicate that cooking has
been completed.
6. To return to the OFF status hold
down for 4 seconds.
/ to select one of
, the appliance will
will flash on
flashing (for