Master Loop Point; Reset Loop Timing - Yamaha TNR-W Manual

6. Master Loop Point

Sets the loop points (TOP and END) for all layers and blocks.
The loop includes the TOP and END points.
The TOP and END points are set via the LED buttons, and the jog dial moves the entire loop
range backward or forward.
●
The END point cannot be moved to a position before (to the left of) the TOP point. The END point can be
moved to the same location as the TOP point, which will produce a 1-beat loop.
■
Range . . . . . . . . . . . . TOP = 1 — 16, END = 1 — 16
■
Default . . . . . . . . . . . TOP = 1, END = 16
■
LED Buttons . . . . . . . The TOP point is indicated by a lit half-column on the upper half of the matrix, and the END
point is indicated by a lit half-column on the lower half of the matrix, as shown below. The
TOP and END points are set via the LED buttons.
[Reference]
❊ ➝
Function Button [L4] ( Page

7. Reset Loop Timing

Resets the current playback position to the TOP of the loop for all layers and blocks.
■
Range . . . . . . . . . . . . OK, CANCEL
■
Default . . . . . . . . . . . OK
■
LED Buttons . . . . . . . No display
Setting Parameters with the Jog Dial
Master Loop Point ∞
TOP: 5 / END:15
TOP Position END Position
TOP Point END Point
27)
Reset Loop Timing ∞
OK
Parameter Settings
■ Play Menu
46
TENORI-ON Manual