Table of Contents
Advertisement
6
When the All Blocks file has been loaded the display shown in step
appear, and playback of the All Blocks file will begin.
Press the [OK] button in the status display when you want to stop playback.
Save All Blocks
●
Saves an All Blocks file containing all active notes and settings such as voice, tempo, etc.,
for all layers and blocks to an SD Memory Card.
1
Insert an SD Memory Card that has sufficient free space for the file to be saved into the
TENORI-ON card slot.
2
Use the jog dial and [OK] button to navigate to the All Blocks function menu as follows:
"Main menu" ➝ "File menu" ➝ "All Blocks"
3
Use the jog dial to highlight the "Save" function, then press the [OK] button.
The file name entry display will appear. A default file name will be provided, which you
can either use as-is or replace with a name of your own.
File name entry procedure is described in the Rename Song section on
Current All Blocks File Name
Available Characters
4
When the file name has been entered as required use the jog dial to highlight the " § "
symbol in the lower right corner of the display and press the [OK] button.
The file name will be entered and the save function will be executed.
A display like the one shown below will appear while the All Blocks file is being saved.
You can cancel the operation by pressing the [OK] or [CANCEL] button.
File data may be irreparably corrupted if you turn off the power or remove the SD Memory Card while the
"Saving..." display is showing.
Setting Parameters with the Jog Dial
All Blocks
∞
Operation:
Load
All Blocks
∞
Operation:
Save
Input File Name
∞
[0302E-BLOCKS-02 ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789
ª§
Blocks:
∞
"1-BLOCKS1020-01 "
Saving...
CANCEL
Parameter Settings
■ File Menu
2
, above, will
Page
65.
Input Cursor
Set File Name
Backspace & Delete 1 Character
The name of the All Blocks file being
saved.
69
TENORI-ON Manual
Advertisement
Table of Contents
