Table of Contents
Advertisement
The name entry procedure is described in the Rename Song section on
●
Owner names can be up to 16 characters in length.
Owner Name Input Field
Available Characters
2
When the owner name has been entered as required use the jog dial to highlight the " § "
symbol in the lower right corner of the display and press the [OK] button.
3
The submenu display will reappear when the name has been entered.
4. Version Check
Displays the version number of the TENORI-ON system ROM.
5. Factory Reset
Resets all TENORI-ON parameters to the original factory settings. All blocks and all layers
are restored to the factory default settings, and all active notes are cleared. All registered
data – alarm, time signal, owner name, etc. – will also be cleared, as will the Save As Default
(➝
Page
106) settings. Loaded sampling files will not be initialized.
Press the [OK] button while this display is showing to restore the factory defaults.
●
Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK]
button) if you want to cancel the operation.
■
Range . . . . . . . . . . . . OK, CANCEL
■
Default . . . . . . . . . . . OK
■
LED Buttons . . . . . . . No display
Setting Parameters with the Jog Dial
Input File Name
∞
[NO NAME
]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789
ª§
Version Check
∞
TENORI-ON Ver.x.xx
Factory Reset
∞
OK
Parameter Settings
■ System Menu
Page
65.
Input Cursor
Set Name
Backspace & Delete 1 Character
108
TENORI-ON Manual
Advertisement
Table of Contents
