Local Control; Synchronize; Loop Indicator - Yamaha TNR-W Manual

4. Local Control

Determines whether TENORI-ON performance input (data) controls the internal MIDI tone
generator (ON) or not (OFF).
When set to "OFF" no sound will be output from the TENORI-ON speakers or headphone
jack, but performance data will still be transmitted via the MIDI connector. Also, the LED
buttons will produce no sound when operated if this parameter is set to "OFF."
■
Range . . . . . . . . . . . . ON. OFF
■
Default . . . . . . . . . . . ON
■
LED Buttons . . . . . . . No display

5. Synchronize

Sets the master or slave status for multiple TENORI-ON units to be synchronized via a MIDI
connection. The "Master" TENORI-ON provides the clock for all "Slave" TENORI-ON units.
●
A TENORI-ON set to the Slave mode will only function properly if correctly connected to the Master TENORI-
ON.
●
For synchronized operation, make sure that the Master TENORI-ON is playing back at a tempo that is close to
the tempo at which the performance data for the Slave TENORI-ON was created. The Slave performance
may not be reproduced properly if there is too great a difference between the tempos.
■
Range . . . . . . . . . . . . MASTER, SLAVE
■
Default . . . . . . . . . . . MASTER
■
LED Buttons . . . . . . . No display

6. Loop Indicator

Determines whether the loop indicator is visible (ON) or not (OFF) in the Score Mode.
This setting applies to all Score Mode layers (layers 1 — 7).
■
Range . . . . . . . . . . . . ON, OFF
■
Default . . . . . . . . . . . ON
■
LED Buttons . . . . . . . Loop indicator
Setting Parameters with the Jog Dial
Local Control ∞
ON
Synchronize ∞
MASTER
Loop Indicator ∞
ON
Parameter Settings
■ Preference Menu
61
TENORI-ON Manual