Loop Point [Lppnt]; End Point [Edpnt] - Yamaha SU10 Owner's Manual

LOOP POINT [LpPnt]

(Appears only if Loop Mode=PLoop)
Purpose: Sets the start point of the loop segment.
Values: 0,...,(127 less than endpoint)
Touch the ribbon; or press or hold [–1], [+1].
To set:
Explanation
This parameter, which appears only if the sample's loop mode is set to "Partial
Loop," sets the start point for the loop segment. Recall that under Partial Loop
mode, the sample plays one time from Start Point to End Point, then plays subse-
quent iterations from Loop Point to End Point.
You can change this value by touching the ribbon. You may find it convenient to
touch the ribbon to get an approximate value, then press [+1] or [–1] for fine tuning.
You can hear how the loop sound alters as you change the value. Simply hold
down the pad while changing the value; the sample will continue to loop as the
value changes.
During editing, the SU10 displays the TEMPO indicator and current tempo at the
bottom right of the LCD. The tempo value will change as you adjust the setting.
Refer to the "About TEMPO" box on page 46 for details.
END POINT
Purpose: Sets the playback end point.
Values: Start/loop point + 127,....,wave end
Touch the ribbon; or press or hold [–1], [+1].
To set:
Explanation
This function sets the sample's end point. The selected point determines where
sample replay ends (for forward-direction play) or starts (for reverse-direction play).
The maximum value is equal to the wave end point; the minimum value is 127
greater than the Start Point or Loop Point (whichever is greater).
Note that you can change this value by touching the ribbon. (The rightmost point
of the ribbon corresponds to the end location of the recorded wave.) You may find
it convenient to touch the ribbon to get an approximate value, then press [+1] or
[–1] for fine tuning.
If loop mode is set to Whole Loop, Partial Loop, or Reverse Loop, you can hear
how the loop sound alters as the value changes. Simply hold down the pad while
changing the value.
[EdPnt]
47
Editing