Volume - Yamaha TNR-W Manual

2. Volume

Sets the volume of individual layers (layer volume common to all blocks).
LED button matrix display and operation are the same as for the [R4] button.
The LED buttons can be used to set the volume of all 16 layers.
The LED buttons adjust the volume in the increments shown below, while the jog dial can be
used for fine adjustment.
■
Range . . . . . . . . . . . . 0 — 127
■
Default . . . . . . . . . . . 96 (all layers)
■
LED Buttons . . . . . . . Each row of LED buttons corresponds to a layer, while the horizontal axis corresponds to
volume level (refer to the illustration below). The LED buttons can be used to adjust the
volume of the corresponding layer.
Layer Number
LED button matrix display in relation to layer volume settings made via the jog dial.
[Reference]
❊ ➝
Function Button [R4] ( Page
Setting Parameters with the Jog Dial
Volume
Layer[01]
96
Volume
The volume value set via the LED buttons.
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
33)
Parameter Settings
■ Layer Menu
∞
Current Layer Number
TENORI-ON Manual
50