Saver Time; Time Signal On/Off; Alarm On/Off - Yamaha TNR-W Manual

4. Saver Time

Sets the amount of time that must elapse before saver operation begins.
If the TENORI-ON is not operated for the time specified here, the type of operation specified
by the Saver Type item will begin.
■
Range . . . . . . . . . . . . OFF, 1 — 1440 (minutes)
■
Default . . . . . . . . . . . 10 (minutes)
■
LED Buttons . . . . . . . No display

5. Time Signal ON/OFF

Determines whether an hourly chime will be played during Interior Mode operation. When
ON, the chime will sound on the hour at 00 minutes and 00 seconds. The total chime
playback time is 8 seconds. Performance data created on the TENORI-ON can be used in
place of the standard hourly chime (➝
■
Range . . . . . . . . . . . . ON, OFF
■
Default . . . . . . . . . . . OFF
■
LED Buttons . . . . . . . No display

6. Alarm ON/OFF

Determines whether the alarm will sound during Interior Mode operation. The total alarm
playback time is 48 seconds. Performance data created on the TENORI-ON can be used in
place of the standard alarm (➝
■
Range . . . . . . . . . . . . ON, OFF
■
Default . . . . . . . . . . . OFF
■
LED Buttons . . . . . . . No display
Setting Parameters with the Jog Dial
Saver Time ∞
10 min
Time Signal ∞
ON
Page 104: Save As Time Signal).
Alarm ∞
ON
Page 105: Save As Alarm).
Parameter Settings
■ Interior Menu
103
TENORI-ON Manual