Using The Setup Wizard - NETGEAR Wireless-N User Manual

Using the Setup Wizard

You can manually configure your Internet connection using the Basic Settings screen, or you can
allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches your
Internet connection for servers and protocols to determine your ISP configuration. This feature is
not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Setup Wizard:
1. To go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard.
Figure 1-4
2. Select Yes for the Auto-Detect Connection Type, and then click Next to proceed.
3. Enter your ISP settings, as needed.
4. At the end of the Setup Wizard, click Test to verify your Internet connection. If you have
trouble connecting to the Internet, see
Configuring Your Internet Connection
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Appendix A,
v1.0, January 2010
"Troubleshooting."
1-4