Wireless Repeating (Also Called Wds) - NETGEAR Wireless-N User Manual

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual

Wireless Repeating (Also Called WDS)

The Dual Band Wireless-N Modem Router can be used with a wireless access point (AP) to build
large bridged wireless networks. Wireless repeating is a type of Wireless Distribution System
(WDS).
Warning: If you use the wireless repeating function, your options for wireless security
are limited to None or WEP. For more information about wireless security, see
Chapter 2, "Safeguarding Your Network."
The following figure shows a wireless repeating scenario:
Base Station AP
Figure 6-12
To set up a wireless network using WDS,
• Both APs must use the same SSID, wireless channel, and encryption mode (see
Configuring Your Wireless Settings" on page 2-5
Configure Your Wireless Network" on page
• Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the
same network.
• All LAN devices (wired and wireless computers) must be configured to operate in the same
LAN network address range as the APs.
6-19
t
he following conditions must be met for both APs:
or "Using Push 'N' Connect (WPS) to
2-12).
v1.0, January 2010
Repeater AP
"Manually
Customizing Your Network Settings