NETGEAR Wireless-N User Manual page 15

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
• Checking for Firmware Updates screen. After the initial configuration, the Firmware
Update screen displays unless you previously cleared the Check for Updated Firmware
Upon Log-in check box.
Figure 1-2
Note: If the modem router is not configured (is in its factory default state) when you
log in, the Setup Wizard displays. See
If the modem router discovers a newer version of the firmware, you are asked if you want to
upgrade to the new firmware (see
new firmware is available, the following message displays.
Figure 1-3
• Router Status screen. The Router Status screen displays if the modem router has not been
configured yet or has been reset to its factory default settings. See
Status Information" on page
You can use the Setup Wizard to automatically detect your Internet connection as described in
"Using the Setup Wizard" on page
configure your Internet connection as described in
ISP Settings" on page
1-3
"Upgrading the Firmware" on page 4-2
4-4.
1-4, or you can bypass the Setup Wizard and manually
1-5.
v1.0, January 2010
"Using the Setup Wizard" on page
"Viewing Modem Router
"Viewing or Manually Configuring Your
Configuring Your Internet Connection
1-4.
for details). If no