NETGEAR Wireless-N User Manual page 55

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Table 3-1. Adding or Editing Firewall Service Rules
Field Outbound Rules
Action • For Outbound rules, ALLOW rules are
only useful if the traffic is already covered
by a BLOCK rule. (That is, you want to
allow a subset of traffic that is currently
blocked by another rule.)
• To define the schedule used in these
selections, use the Schedule screen (see
"Scheduling Blocking" on page
LAN users These settings determine which computers
(Outbound on your network are affected by this rule,
Services only) based on their source (LAN) IP address.
Select the desired option:
• Any. All local IP addresses are covered
by this rule.
• Address range. If this option is selected,
you must enter the Start and Finish
fields.
• Single address. Enter the required
address in the Start fields.
Send to LAN
Server (Inbound
Services only)
WAN Servers These settings determine which Internet locations are covered by the rule, based on their
destination (WAN) IP address. Select the desired option:
• Any. All local IP addresses are covered by this rule.
• Address range. If this option is selected, you must enter the Start and Finish fields.
• Single address. Enter the required address in the Start fields.
Log This determines whether packets covered by this rule are logged. Select the desired
action:
• Always. Always log traffic considered by this rule, whether it matches or not. This is
useful when debugging your rules.
• Never. Never log traffic considered by this rule, whether it matches or not.
• Match. Log traffic only it matches this rule. (The action is determined by this rule.)
• Not Match. Log traffic that is considered by this rule, but does not match (The action is
NOT determined by this rule.)
3-9
Inbound Rules
• For Inbound rules, BLOCK rules are only
useful if the traffic is already covered by
an ALLOW rule. (That is, you want to
block a subset of traffic that is currently
allowed by another rule.)
• To define the schedule used in these
selections, use the Schedule screen (see
3-17). "Scheduling Blocking" on page
Enter the IP address of the PC or Server on
your LAN that will receive the inbound traffic
covered by this rule.
v1.0, January 2010
3-17).
Protecting Your Network