NETGEAR Wireless-N User Manual page 29

3. In the Security Options section, select the WEP radio button:
Figure 2-3
4. Select the Authentication Type: Automatic, Open System, or Shared Key. The default is
Open System.
Note: The authentication scheme is separate from the data encryption. You can select
an authentication scheme that requires a shared key but still leaves the data
transmissions unencrypted. If you require strong security, use both the Shared
Key and WEP encryption settings.
5. Select the Encryption Strength setting:
• WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
• WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
6. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
Safeguarding Your Network
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
v1.0, January 2010
2-8