Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Pneumatic 47612 Contractor Series Set Up And Operating Instructions Manual

15 gauge air angle nailer
Table of Contents

Advertisement

Anytime any maintenance or repairs are done (including clearing jams), FIRSt:
1.
Disconnect the Nailer from the air hose.
2.
Empty the Magazine (69) completely.
3.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon-
nected and is incapable of firing any nails.
1.
Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil,
then wipe dry. Do not use detergent oil or additives as these lubricants will cause
accelerated wear to the internal seals.
2.
Inspect the air supply filter, if present, before each use and clean or replace as
necessary. Dirt and water in the air supply filter are major causes of pneumatic
tool wear. Use a filter/oiler for better performance and longer tool life. The filter
must have adequate flow capacity for the specific application.
3.
Clean the external parts of the Nailer with a clean cloth and mild detergent or
nonflammable solvent. Then, dry.
4.
Store the unit in a safe, clean, dry location out of reach of children and other un-
authorized people.
5.
All maintenance, service, or repairs not listed in this manual are only to be
attempted by a qualified technician.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY
REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
SKU 47612
For technical questions, please call 1-800-444-3353.

Inspection, maintenance, and cleaning

please Read the Following carefully

Page 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents