Picture Save Destination (Cards And Built-In Memory); Remaining Battery And Memory Capacity; Setting The Clock - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Inserting and removing the card (optional)/
the battery
(Continued)

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory
■
Built-in memory (approx. 15 MB
●
Pictures may be copied between cards and the built-in memory (→137).
●
The access time for the built-in memory may be longer than the access time for a card.
●
Clipboard pictures (→110) are saved to built-in memory.
●
[QVGA] in [REC QUALITY] can only be available to record motion pictures in the built-
in memory.
■
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
Type of Card Capacity
SD memory 8 MB – 2 GB
cards
SDHC memory 4 GB - 32 GB
cards
SDXC memory 48 GB - 64 GB
cards
●
Please reformat the card with this camera if it has already been formatted with a
computer or another device. (→28)
●
If the write-protect switch is set to 'LOCK', the card cannot be used to
record or delete pictures, and it cannot be formatted.
●
It is recommended that you copy important pictures to your computer (as
electromagnetic waves, static electricity, or faults may cause data to be damaged).
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)

Remaining battery and memory capacity

Remaining battery (only when using battery)
If the battery mark flashes red, recharge or replace battery. (→11)
Displayed when no card is inserted (pictures will be saved to built-in
memory)
Pictures remaining ( →174,
When in operation
(Card) or (Built-in memory) are illuminated red.
While the light remains lit, an operation is taking place, such as picture writing, reading,
deletion or formatting. While the light is lit, do not turn off the power or remove battery,
card, AC adaptor (optional) or DC coupler (optional) (this can cause data loss or
damage). Do not subject the camera to vibrations, impact, or static electricity. Should
any of these cause camera operation to be terminated, attempt to perform the operation
again.
16
VQT2R20
, approx. 40 MB )
Notes
• Can be used with devices compatible with the respective
formats.
• Before using SDXC memory cards, check your computer
and other devices support this type of card.
http://panasonic.net/avc/sdcard/information/SDXC.html
• Cards in capacities not listed at left are not supported.
(flashes red)
→176)

Setting the Clock

Set REC/PLAY switch to
if not.
REC/PLAY switch
Switch
(LOCK)
For the operating procedures for the DMC-ZS6/DMC-ZS5 (→19)
( The Clock is not set when the
camera is shipped.)
before turning on the power.
Turn on the power
The power is turned on.
If the language select screen is not
displayed, proceed to step
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
Press [MENU/SET]
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
Select either [24HRS] or [AM/
Select the
PM] for the time display format.
setting
item
Change
the values
and
settings Select the display order for the
day, month, and year ([M/D/Y],
[D/M/Y], or [Y/M/D]).
• To cancel → Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Press [MENU/SET]
Press [MENU/SET]
• To return to the previous screen, press
(Continued on the next page)
.
.
17
VQT2R20