[Version Disp.]/ [Format]/ [Language]; [Demo Mode] - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Operating instructions for advanced features
Table of Contents

Advertisement

Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu (→20)
Item
Current version is displayed.
[VERSION DISP.]
Check the version of the
camera firmware.
[YES]/[NO]
[FORMAT]
• This requires a sufficiently charged battery (→11), or an
Use when [BUILT-IN
AC adaptor (optional) and DC coupler (optional). When
MEMORY ERROR]
formatting the built-in memory, remove the cards.
or [MEMORY CARD
(Only inserted card will be formatted if present; built-in
ERROR] appears, or
memory will be formatted if no card is inserted.)
when formatting the built-
• Always format cards with this camera.
in memory or card.
• All picture data including protected pictures will be
deleted. (→135)
When a card/built-in
• Do not turn off power or perform other operations during
memory is formatted,
formatting.
the data cannot be
• Formatting the built-in memory may take several
restored. Check the
minutes.
content of the card/
• Consult your nearest Service Center if format cannot be
built-in memory
successfully completed.
carefully before
formatting.
Set the language displayed on the screen.
[LANGUAGE]
Change display
language.
28
VQT2R20
(Continued)
Settings, notes
For details about the setting procedure in the [SETUP] menu (→20)
Item

[DEMO MODE]

[STABILIZER DEMO.]: (Only during recording)
Extent of jitter is shown on graph (estimate)
View demonstration of
Large ← Small → Large
functions.
• During demo screen display, the Optical Image Stabilizer
switches ON and OFF every time [MENU/SET] is
pressed.
• Cannot display during Playback Mode.
• To stop→ Press the [DISPLAY] button.
• Recording and zoom cannot be performed during demo.
[AUTO DEMO]: View introductory Slide Show
[OFF]/[ON]
• To close → Press [MENU/SET]
• When a card is not inserted, Automatic Demo Mode
will start if there is no operation for about two minutes
with the power ON when connected to the AC adaptor
(optional) and DC coupler (optional).
• [AUTO DEMO] cannot be displayed on external devices
such as TVs.
Settings, notes
Extent of jitter
Extent of jitter after correction
29
VQT2R20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-zs5Lumix dmc-zs7

Table of Contents