Message Displays - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Operating instructions for advanced features
Table of Contents

Advertisement

Message displays

[THIS MEMORY CARD CANNOT BE USED]
A MultiMediaCard was inserted.
→ Not compatible with the camera. Use a compatible card.
[THIS MEMORY CARD IS WRITE-PROTECTED]
Unlock the write-protect switch on the card. (→16)
[NO VALID PICTURE TO PLAY]
Take pictures, or insert a different card already containing pictures.
[THIS PICTURE IS PROTECTED]
Release the protection before deleting, etc. (→135)
[SOME PICTURES CANNOT BE DELETED]
Non-DCF pictures (→44) cannot be deleted.
→ Save needed data on a computer or other device, and then use [FORMAT] on the camera to
erase the card. (→28)
[NO ADDITIONAL SELECTIONS CAN BE MADE]
The number of pictures that can be deleted at once has been exceeded.
More than 999 pictures have been set as favorites. (Other than AVCHD Lite motion pictures
The number of pictures allowing [TITLE EDIT], [TEXT STAMP] or [RESIZE] (multiple settings) at
once has been exceeded.
[CANNOT BE SET ON THIS PICTURE]
[PRINT SET], [TITLE EDIT], or [TEXT STAMP] cannot be made for non-DCF pictures (→44).
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]
The lens is not working correctly.
→ Turn on power again.
(Consult the dealer or your nearest Service Center if display still remains)
[SOME PICTURES CANNOT BE COPIED]
Pictures cannot be copied in following cases.
→ Picture of same name already exists in built-in memory when copying from card.
→ File is not of DCF standard.
→ Picture taken or edited on a different device.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY]
There is no space left on the built-in memory or the card. When you copy pictures from the built-in
memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
[BUILT-IN MEMORY ERROR]
[FORMAT BUILT-IN MEMORY?]
Displayed when formatting built-in memory via computer, etc.
→ Reformat directly using camera. Data will be deleted.
[MEMORY CARD ERROR]
[FORMAT THIS CARD?]
The card format cannot be used with this camera.
→ Save needed data on a computer or other device, and then use [FORMAT] on the camera. (→28)
[INSERT SD CARD AGAIN]
[TRY ANOTHER CARD]
Access to card has failed.
→ Insert card again.
Try with a different card.
154
VQT2R20
[THIS PICTURE CANNOT BE DELETED]
[SYSTEM ERROR]
[COPY COULD NOT BE COMPLETED]
[NOT ENOUGH MEMORY ON THE CARD]
Meanings of and required responses to major messages displayed on LCD monitor.
[MEMORY CARD ERROR]
Card is not of SD standard.
When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are
supported.
[READ ERROR]/[WRITE ERROR]
Data read has failed.
→ Check whether card has been inserted correctly (→14).
Data write has failed.
→ Turn off power and remove card, before re-inserting and turning on power again.
Card may possibly be damaged.
Try with a different card.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS CARD.]
A card that has been used in another camera to record an AVCHD motion picture in a different
broadcast system cannot be used to record AVCHD Lite motion pictures with this camera.
→ Format the card with this camera. The data will be deleted.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]
Using a card of SD speed 'Class 4' ∗ or above is recommended for recording motion pictures in
[AVCHD Lite(GPS REC)]/[AVCHD Lite].
)
Using a card of SD speed 'Class 6' ∗ or above is recommended for recording motion pictures in
'MOTION JPEG'.
∗ The SD speed class is a speed rating for continuous writing.
If recording stops even when using the card above, the data writing speed is low. We recommend
backing up the data on the memory card and reformatting it (→28).
Motion picture recording may be automatically terminated with certain cards.
[A FOLDER CANNOT BE CREATED]
Folder numbers in use have reached 999.
→ Save all necessary data to computer (or other device), and [FORMAT] (→28).
Folder number is reset to 100 when performing [NO.RESET] (→25).
[PICTURE IS DISPLAYED FOR 16:9 TV]
AV cable is connected to camera.
→ To remove message immediately → Press [MENU/SET].
→ To change aspect ratio → Change [TV ASPECT] (→26).
USB connection cable is only connected to camera.
→ Message disappears when cable is also connected to another device.
[THIS BATTERY CANNOT BE USED]
Use a genuine Panasonic battery.
Battery cannot be recognized as terminal is dirty.
→ Wipe any dirt away from the battery terminal.
[NO BATTERY POWER REMAINS]
The battery level is low.
→ Charge the battery before use. (→11)
[GPS FEATURE IS NOT AVAILABLE IN THIS REGION.]
GPS may not work in China or in the border regions of countries neighboring China. (Current as of
February 2010)
[MEMORY CARD PARAMETER ERROR]
[PLEASE CHECK THE CARD]
[PICTURE IS DISPLAYED FOR 4:3 TV]
155
VQT2R20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-zs5Lumix dmc-zs7

Table of Contents