Remaining Battery And Memory Capacity; Picture Save Destination (Cards And Built-In Memory) - Panasonic DMC-LS5 Owner's Manual

Hide thumbs Also See for DMC-LS5:

User manual

Operating instructions manual (78 pages)

Basic owner's manual (2 pages)

Table Of Contents

Table of Contents

Displayed when no card is inserted (pictures will be saved to built-in memory)

When in operation

(Card) or

While the light remains lit, an operation is taking place, such as picture writing, reading,

deletion or formatting. While the light is lit, do not turn off the power or remove battery,

card, as this can cause data loss or damage.

Keep the camera away from vibrations, impact, or static electricity. Should any of these

cause camera operation to be terminated, attempt to perform the operation again.

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory

■

Built-in memory (Approx. 10 MB)

●

Pictures may be copied between cards and the built-in memory (→54).

●

The access time for the built-in memory may be longer than the access time for a card.

●

[QVGA] in [Rec Quality] can only be available to record motion pictures in the built-in

memory.

■

Compatible memory cards (optional)

The following SD standard-based cards (Panasonic brand recommended)

Type of Card

SD Memory Cards

SDHC Memory Cards

SDXC Memory Cards

∗

SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by

checking the card label or other card related materials.

(Example)

Downloaded From camera-usermanual.com Panasonic Manuals

Inserting and removing the card (optional)/the batteries