[Travel Mode]; [Travel Date] - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Useful features for travel
∗
Recording Mode:
• If items have been set, the settings for each item are displayed.
The menu name for the selected item is displayed.

[TRAVEL DATE]

If you set your travel schedule and record pictures, which day of your trip the picture was
recorded will be recorded.
Set-up: • Clock must be set in advance (→17, 19).
Select [TRAVEL DATE] from the
[TRAVEL MODE] menu (→20)
Select [TRAVEL SETUP]
Select [SET]
Set the departure date
●
The number of days elapsed is displayed for approx. 5 sec. when switching from
Playback to Recording Mode or when power is turned on. (
of screen)
●
The travel date is calculated from the set departure date and the date set in the
camera's Clock. When destination is set in [WORLD TIME], days elapsed are
calculated based on local destination time.
●
The set travel date is saved even when the camera's power is turned off.
●
When [TRAVEL SETUP] is set to [OFF], the number of days elapsed is not recorded. It
is not displayed even if [TRAVEL SETUP] is set to [SET] after recording.
●
If settings are made before the departure date, the number of days to departure are
displayed in orange with a minus sign (but not recorded).
90
VQT2R20

[TRAVEL MODE]

∗
Set the return date in the
same way
• The color of the date frame from the
departure date to the return date
changes.
Close the menu
■
Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step .
• If [TRAVEL SETUP] is turned [OFF],
[LOCATION] is also automatically turned
[OFF].
displayed at bottom-right
∗ Recording only. (Cannot set.)
●
When [TRAVEL DATE] is displayed in white with a minus sign, the [HOME] date is one
day in advance of the [DESTINATION] date (this is recorded).
●
To print the number of days that have passed, either use [TEXT STAMP] or print using
the software on the supplied CD-ROM 'PHOTOfunSTUDIO'.
●
[TRAVEL DATE] cannot be set for motion pictures recorded in [AVCHD Lite].
[TRAVEL DATE]
If you set your travel schedule and record pictures, which day of your trip the picture was
recorded will be recorded.
Set-up: • Clock must be set in advance (→17, 19).
Select [TRAVEL DATE] from
[TRAVEL MODE] menu (→20)
Select [SET]
Set departure date
●
The number of days elapsed is displayed for approx. 5 sec. when switching from playback
to Recording Mode or when power is turned on. (
●
The travel date is calculated from the set departure date and the date set in the
camera's Clock. When destination is set in [WORLD TIME], days elapsed are
calculated based on local destination time.
●
The set travel date is saved even when the camera's power is turned off.
●
When [TRAVEL DATE] is set to [OFF], the number of days elapsed is not recorded. It is
not displayed even if [TRAVEL DATE] is set to [SET] after recording.
●
If settings are made before departure date, number of days to departure are displayed
in orange with a minus sign (but not recorded).
●
When [TRAVEL DATE] is displayed in white with a minus sign, the [HOME] date is one
day in advance of the [DESTINATION] date (this is recorded).
●
To print the number of days that have passed, either use [TEXT STAMP] or print using
the software on the supplied CD-ROM 'PHOTOfunSTUDIO'.
Set the return date in the
same way
• The color of the date frame from the
departure date to the return date
changes.
Close the menu
• The departure date and return date
you set are displayed on the [TRAVEL
MODE] menu screen.
■
Clearing the information
After the return date, the information
is automatically cleared. To clear the
information before this date, select [OFF]
in step .
• If [TRAVEL DATE] is turned [OFF],
[LOCATION] is also automatically turned [OFF].
displayed at bottom-right of screen)
VQT2R20
91