Using The [Setup] Menu; [Clock Set]/ [Beep]/ [Volume]/ [Cust.set Mem.] - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Using the [SETUP] menu

For details about the setting procedure in the [SETUP] menu (→20)
Make general camera settings such as adjusting the Clock, extending the battery life, and
changing the Beep sounds.
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important for Clock setting
and battery life. Please check these before use.
Item
Set time, date, and display format.
[CLOCK SET]
Set the date and time.
(→17, 19)
[BEEP LEVEL]
[BEEP]
/
Change or mute the
beep/shutter sounds.
[BEEP TONE]
/
[SHUTTER VOL.]
/
[SHUTTER TONE]
/ /
0 • • [LEVEL3] • • [LEVEL6]
[VOLUME]
• Cannot be used to adjust TV speaker volume when
Adjust volume of sound
connected to TV. (We recommend setting camera
from speakers (7 levels).
volume to 0)
[C1] / [C2] / [C3]
[CUST.SET MEM.]
Register settings on
current camera. (→59)
22
VQT2R20
Settings, notes
/ : Mute/Low/High
/ : Change beep tone.
/ : Mute/Low/High
: Change shutter tone.
For details about the setting procedure in the [SETUP] menu (→20)
Item
[LCD MODE]
[OFF]: Normal (cancel setting)
Make LCD monitor easier
[AUTO POWER LCD]:
to see.
The brightness is adjusted automatically depending on
how bright it is around the camera.
[POWER LCD]:
Makes screen brighter than normal (for outdoor use).
• [AUTO POWER LCD] does not work in the following cases:
During playback, during menu display, when connected to
computer/printer.
• [POWER LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any button to
make brighter again).
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different than
their actual appearance, but this will not affect the recorded
picture.
• Block out sunlight (with hand, etc.) if reflection makes screen
difficult to see.
• Setting [LCD MODE] will reduce the number of pictures that can
be recorded and recording time.
• When [LCD POWER SAVE] is set, the brightness of the LCD
monitor follows the setting in [LCD MODE], but the picture quality
of the LCD monitor stays at a low level.
[STANDARD]/[LARGE]
[DISPLAY SIZE]
Change the display size
of the menu.
[GUIDE LINE] [REC. INFO.]
Select recording [OFF]/[ON] (Display recording information with guide
information display and
types of guidelines. (→46)
[PATTERN]
/ : Change the patterns of guide lines.
[OFF]/[ON]
[HISTOGRAM]
Check subject brightness
on graph. (→46)
Settings, notes
lines.)
VQT2R20
23