Automatically Register Face Pictures; Setting Recognition Sensitivity - Panasonic Lumix DMC-ZS6 Operating Instructions Manual

Recording with the Face Recognition function
(continued)
[FACE RECOG.]
Recording Mode:

Automatically register face pictures

You can set the camera so that the registration screen automatically displays after
recording a subject that is recorded many times.
Select [FACE RECOG.] from
the [REC] menu (→20)
Select [SET]
Select [AUTO
REGISTRATION]
■
Register face pictures from the automatic registration screen
Select [YES] from the registration confirmation screen
Select [NEW PERSON] or [ADDITIONAL IMAGE]
Item About settings
[NEW If 6 people are already registered, select a person to replace.
PERSON]
[ADDITIONAL Select the person for which you are registering additional face
IMAGE] pictures
• If 3 face pictures are already registered, select a picture to
replace.
Select the item to edit and make the setting
82
VQT2R20
Select [ON]
Press the shutter button
halfway to close the menu
●
In some cases it may be very difficult
to recognize faces that have only been
registered by automatic registration.
From the [REC] menu's [FACE RECOG.],
register face pictures in advance.
• If Face Recognition is not registered, proceed
to .
• If [NO] is selected, a re-confirmation screen is
displayed.
If [YES] is selected here, [AUTO
REGISTRATION] is turned to [OFF].
(→80)
(Step )
●
The registration screen is displayed for the third time (estimate). (This does not occur
in [SELF PORTRAIT] Scene Mode, [BURST], [AUDIO REC.], [AUTO BRACKET] or
[MULTI ASPECT].)
●
If the registration screen is not displayed easily, recording in the same environment and
with the same expression will make it display more easily.
●
If a face is not recognized despite being registered, re-registering the person from
[REC] menu's [FACE RECOG.] at that location will make it easier for the camera to
recognize the person.
●
If the registration screen is displayed for a person already registered, making additional
registration of the person in that status will make it easier for the camera to recognize
the person.
●
If a picture recorded with a flash is registered, it may be difficult for the camera to
recognize the person.
●
When [AUTO REGISTRATION] is set to [ON], the [FACE RECOG.] setting is also
switched to [ON ] automatically.

Setting recognition sensitivity

The Sensitivity setting of the camera can be set if it is having difficulty with Face
Recognition or making mistakes.
Select [FACE RECOG.] from
[REC] menu (→20)
Select [SET]
Select [SENSITIVITY]
●
Setting [SENSITIVITY] at [LOW] makes it easier for the camera to recognize faces but
also increases the possibility of recognizing the face as that of a different person.
Select the level of a
sensitivity setting
[HIGH]: Set when camera
is having difficulty
recognizing faces
[NORMAL]: The usual setting
[LOW]: Set when the camera
frequently recognizes
a face as that of a
different person
Press the shutter button
halfway to close the menu
83
VQT2R20