Making Full-Size Printouts - Sony UP-2300 Operating Instructions Manual

Making Full-Size Printouts

16
Operation
This section explains how to make a full-size printout. The operations described
here constitute the basic procedure for making a printout.
Before making a full-size printout
• All connections should have already been made. (see page 65)
• Ensure that the appropriate ink ribbon cartridge/paper set is being used and that
they are correctly loaded. (see pages 9, 12 and 99)
• Select the input signal to be used to make a printout. (see page 14)
• Set the printer to store one full-size image into memory. (see page 32)
• Select the appropriate memory page. (see page 31)
DISPLAY
STOP button
OFF
button
1
1
Turn on the video monitor and the printer.
2
Start the video source.
This operation is done using the controls of the video equipment acting as the
source.
Video monitor screen
Q 1 A 1
SOURCE/MEMORY button
Printer window display
Q1 A
S
Shows that the image from source equipment is
displayed on the screen.
3 4
1 S