Sony UP-2300 Operating Instructions Manual page 40

Making Variations of Printouts (continued)
40
Operation
2
Press the CAPTURE button at the instant the image you want to print appears
on the screen.
The image has been stored to the star (*) that blinked green on the video
monitor screen or the position number displayed on the printer window display
in step 1.
The green blinking star (referred to as the cursor) on the monitor moves to the
next position and the number the printer window display advances by 1.
The blinking green cursor moves.
C
Q 1 A 4 F
At this time, the image captured in memory is displayed on the video monitor
screen. However, the image to be displayed after a few seconds depends on the
setting of AUTO LIVE in the FUNCTION SETUP menu. (see page 36)
Go to step 3 when the memory image remains on the video monitor screen.
Go to step 4 when the source image is displayed.
3
Press the SOURCE/MEMORY button.
The source image appears on the video monitor screen.
4
Repeat steps 2 and 3 until you have captured four images when the memory
image remains on the video monitor screen.
Repeat step 2 until you have captured four images when the source image
appears on the video monitor screen.
To replace a captured image
Example: When you want to change the image stored to the third position.
1 Select the third position where there is the image which you want to
replace by pressing the ◊, √, ı or ∫ button.
Pressing the ◊, √, ı or ∫ button moves the cursor one position vertically or
horizontally.
C
Q 1 A 4 F
Press the ◊, √, ı or ∫ button until the third cursor blinks green.
C
Q1 A
Nothing changes in the printer window
M
display.
C
Q1 A
M
4 F M
4 F M