Sony UP-2300 Operating Instructions Manual page 41

Making a printout with an insert
2 Start the video source.
If the memory image is displayed, press the SOURCE/MEMORY button to
display the source image.
3 Press the CAPTURE button at the instant the image you want to print
appears.
The previously stored image is replaced with the newly stored image.
To skip a previously captured image
When an image has already been captured, the previously captured image can
be replaced by pressing the CAPTURE button.
Skip the corresponding image by pressing the ◊, √, ı or ∫ button.
To capture images automatically
Images can be stored in all of the memory pages according to setting made for
INTERVAL of the PRINTER SETUP menu to ON. (see page 36)
5
Press the PRINT button.
The four reduced images are printed on one sheet of paper.
You can make printouts with an insert which is reduced image.
Example: To make a printout with one of four reduced images inserted.
The operation to make a printout with one of 16 reduced images is the same.
1
Display the full-size image stored in memory. (Follow steps 1 to 3 of "Making
Full-Size Printouts" on page 16.)
2
Set the multiple reduced image type to 4 (without white borders).
(See "Selecting the number of reduced images to be captured in memory" on
page 32.)
3
Capture the image to be inserted.
1 Select the position where a reduced image is to be inserted by pressing the
◊, √, ı or ∫ button.
Move the green cursor to the position where the
reduced image is inserted.
C
Q 1 A 4 F
2 Press the CAPTURE button at the instant the image you want to insert
appears.
The image is captured to the position selected in step 1.
4
Press the MULTI PICTURE button.
The full-size image with an insert appears on the video monitor.
5
Press the PRINT button.
The image with an insert is printed.
S
41
Operation