Making Full-Size Printouts - Sony UP-2100 Operating Instructions Manual

Making Full-Size Printouts

This section explains how to make a full-size printout. The operations described
here constitute the basic procedure for making a printout.
Before making a full-size printout
• All connections should have already been made. (see page 53)
• Ensure that the appropriate ink ribbon cartridge/paper set is being used and that
they are correctly loaded. (see pages 8, 11 and 50)
• Select the input signal to be used to make a printout. (see page 13)
• Set the printer to store one full-size image into memory. (see page 29)
• Select the appropriate memory page. (see page 28)
1
2
DISPLAY
STOP button
OFF
button
1
Turn on the video monitor and the
printer.
Start the video source.
This operation is done using the
controls of the video equipment acting
as the source.
3 4
SOURCE/MEMORY button
Q 1 A 1
Shows that the image from
source equipment is
displayed on the video
monitor screen.
Continue to next page m
S
15
Operation