Related Manuals for Sony UP-D72XRS
Summary of Contents for Sony UP-D72XRS
- Page 1 2-636-491-11 (1) Digital Imager Instructions for Use UP-D72XRS © 2005 Sony Corporation...
- Page 2 For the customers in the U.S.A and Canada Model No. ____________________ Serial No. ____________________ Model UP-D72XRS is Non-Patient Equipment. This unit can not be used in the vicinity of patients. WARNING * Patient Vicinity To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- Page 3 Consult your dealer. (According to standard EN60601-1-2 and CISPR11, Class B, Group 1) Caution When you dispose of the unit or accessories, you must obey the law in the relative area or country and the regulation in the relative hospital. Warning on power connection Use a proper power cord for your local power supply.
-
Page 4: Table Of Contents
Table of Contents Introduction Features ..............5 Location and Function of Parts and Controls ..5 Front ..............5 Rear ..............6 Preparation Supplied Accessories ..........7 Connections ............8 Operation Loading Paper ............9 Recommended Paper .......... 9 Loading Paper ............ 9 Printing .............. -
Page 5: Introduction
Location and Function of Parts and Controls For details, refer to the pages indicated in parentheses. Features The Sony UP-D72XRS Digital Imager is a thermal Front printer designed to reproduce images transferred from the computer via the high-speed interface on a thermal paper. -
Page 6: Rear
E G, g, F, f (Cursor control) buttons (12, 13, 14, Rear Use these buttons to increase or decrease a value or level shown on the menu, or to scroll up and down through a menu. F EXEC button (11, 17) Press this button to carry out cleaning or cancel the error status after solving the problem. -
Page 7: Preparation
To attach the tray guide cover to the printer Preparation Insert the tray guide cover to the slits until it stops. Slits Supplied Accessories This printer is packed together with the following accessories. Check that nothing is missing from your package. -
Page 8: Connections
• Cable connection requirements vary depending on computers and peripherals. For the details of your installation, please refer to the manuals for your computer and peripherals. UP-D72XRS to -AC IN to PARALLEL DATA Parallel data cable (shielded type) -
Page 9: Operation
Loading Paper Recommended Paper The following printing pack is made especially for the UP-D72XRS. Thermal printing paper UPP-725 Contains thermal paper. 100 sheets of 8 × 10 inches (about 203 × 254 mm) size... -
Page 10: Printing
Close the tray cover and slide the paper tray into the Printing printer until it clicks into place. Before printing • Ensure that the printer is properly connected to the computer (page 8). • Ensure that the paper is properly loaded in the paper tray (page 9). - Page 11 2 The stored image data is printed as soon as the • When the printer is turned off, transferred image is print command is entered from the computer or erased from memory, so there is nothing to print. Send the PRINT button of the printer is pressed. the image data to the printer again to print it.
-
Page 12: Setting The Print Quantity
To exit from the print quantity setting menu, press Setting the Print the PRINT QTY button again. The printer window display returns to standby Quantity status and you can print the number of copies based on the new setting. You can set a print quantity value of up to 10 copies before or during printing. -
Page 13: Menu Operation
Perform the desired adjustment. Menu Operation 1 Select the item to be adjusted by using the F or f button. You can set the following items using the relevant menu: F: Scrolls up to the previous item. • Adjusting printout quality f: Scrolls down to the next item. -
Page 14: Setting The Margin Print Option
Set the print density of the margin by pressing the Setting the Margin Print Option G or g button. You can set whether the right and left margins of the printout are to be printed or not. 1, 5 2, 3, 4 Display the desired print density of the margin print area by pressing the G or g button. - Page 15 Print mode Select To print the image in mirror mode. To print the image in the normal direction. To exit from the mirror print setting mode, press the MENU button again. The printer returns to standby status. Menu Operation...
-
Page 16: Miscellaneous
in the paper tray. This will cause the printer to Miscellaneous malfunction. Also, if the paper is used in this state, spots are likely to appear on the printout. • To store a half-used package of paper, replace the paper in its original packing and reseal the package. If possible, before using sealed paper, place it, in its Precautions sealed package, in a warm room for several hours. - Page 17 Remove the paper tray again. Remove the head Note cleaning sheet and place the roller cleaning sheet in Place the head cleaning sheet in the paper tray the paper tray, and re-insert the paper tray. according to the instruction described on the head cleaning sheet.
-
Page 18: Cleaning The Filter
Insert the cleaning tip holder until it stops, then pull Loosen the screws which secure the fan cover, and it toward you until the open window on the holder move the loosened screws toward the left and right fully appears. respectively. -
Page 19: Specifications
Degree of safety in the presence of Specifications flammable anesthetics or oxygen: Not suitable for use in the presence of flammable anesthetics or oxygen Power requirements Mode of operation: 100 to 120 V AC, 50/60 Hz Continuous (for 100 to 120 V AC users) 220 to 240 V AC, 50/60 Hz Design and specifications are subject to change without (for 220 to 240 V AC users) -
Page 20: Messages
PLEASE CLEAN This message appears whenever the display, turn off the power number of sheets printed reaches 500 immediately and contact your Sony sheets. dealer. tClean the thermal head. When you NO IMAGE DATA No image data is stored in the printer complete the cleaning of the memory. -
Page 21: Troubleshooting
If the problem persists, Remove the jammed paper. turn off the printer and consult your Sony dealer. If you find a piece of paper jammed around Symptom... - Page 22 2 Pull out the jammed paper toward you slowly. 3 Re-insert the tray guide cover as it was. Re-insert the paper tray into the printer. Notes • Discard the sheets removed in step 2. • Ensure that the paper is properly loaded. Press the EXEC button.
-
Page 23: Index
Index Paper if the paper jams 21 loading 9 note on storing the paper 10 Assembly recommended paper 9 tray guide cover 7 Precautions condensation 16 installation 16 safety 16 Cleaning transporting the printer 16 cabinet 16 Printing filter 18 how to print 10 thermal head 17 if the printer does not print 11... - Page 24 Sony Corporation...