Managing Access Profiles - Gigaset SL75 WLAN User Manual

Creating/managing access profiles
Editing the "provider" profile area
Requirement: You are editing the
profile area (page 59).
The list of available providers is displayed.
Specifying the provider
q
Select a provider and
press
§OK§
Note:
If your provider is not included in the list, select
Provider. You must then make the SIP set-
Other
tings via the Web configurator (page 95).
Editing the provider
q
Select a provider and
press
§Edit§
¤
Make an entry on several lines
(page 120):
Displayed Name
Enter any name that is to be displayed
to the other party.
Authent. Name
If you have agreed an additional user
password with the SIP provider for
authentication, enter it here.
Name is usually the same as the user
name.
Authent. Password
Enter password.
User Name
Enter user ID.
¤
Save changes (page 121).
Notes:
– You can only set up additional providers via
the Web configurator on your PC (page 95).
If you select Other Provider, a corresponding
message is displayed.
– Other SIP settings are not necessary for
basic operation. You can edit all SIP settings
on your PC via the Web configurator.
64
Provider
.
.
Authent.

Managing access profiles

Note:
For how to call up an access profile with the
connection wizard, see page 60.
¢ ¢
v Ð
Network Config.
¢
Access Profiles
The profile overview is displayed. If no
access profile has been set up yet, a blank
profile is opened.
Selecting an access profile
q
Select access profile.
Press the display key to acti-
§OK§
vate the access profile.
You are prompted to answer whether you
wish to log in with the new access profile
immediately:
Press the display key to end
§Yes§
the current connection.
The handset establishes a connection to
the WLAN and SIP provider with the
selected access profile. The process can
take some time.
Or:
Press the display key to retain
§No§
the current connection.
Viewing an access profile
¤
Select access profile.
Press the display key.
§View§
The current settings are displayed. The
name of the access profile is displayed in
the header.
If necessary, press the control
§Edit§
key to edit the access profile
(page 65).