Table of Contents
Advertisement
Email messages
Self-help with errors
The following errors can occur when send-
ing and receiving Email messages:
Check E-Mail Settings
u
Settings necessary for establishing a
connection to the incoming or outgo-
ing mail server have not been made.
¤
Check settings and, if necessary,
enter the missing value and save it
(page 45).
Login failed!
u
Error when logging in to the incoming
or outgoing mail server. This can have
the following causes:
– User name and/or password entered
wrongly in the handset.
¤
Check settings (page 45).
– Temporary problems with the
server.
¤
Repeat the check for new messages
or Email message transmission at a
later time.
E-mail: No server
u
The address of the incoming mail
server stored in the handset (name/IP
address, port) is wrong.
¤
Check settings (page 45).
u
The incoming mail server is not run-
ning or is not connected to the Inter-
net.
¤
Repeat check at a later time.
E-Mail: memory full !
u
It was not possible to receive all the
new Email messages. Your handset's
memory is full.
¤
Delete old Email messages from the
Email lists or objects from the file
manager (page 50) and start the
check again.
52
E-Mail: receive error
u
It was not possible to fetch all the new
Email message from the incoming mail
server.
¤
Repeat check at a later time.
E-Mail: could not send
u
It was not possible to send an Email
message. It is stored in the
¤
Send the Email message from the
list at a later time.
Unsent
Unsent
list.
Advertisement
Table of Contents
