Table of Contents
Advertisement
Handset settings
Setting the camera
You can set the picture quality (resolu-
tion), brightness and white balance for
the integrated camera.
¤
Open the following Web page:
¢
User
Camera
Settings.
¤
For Quality, click on the option
High.
¤
For Brightness, click on the option
or High.
Normal
¤
For
Balance, click on the option
White
Automatic,
Indoor
¤
Click on Apply.
Note:
For how to make the setting on the handset,
see page 44.
Setting the date and time
There are two ways to set the date and
time:
u
You can either set the date and time
manually.
u
Or you can activate an SNTP server
(time server). The date and time are
periodically updated by the server
automatically.
¤
Open the following Web page:
¢
Admin
System Settings
¢
Time and
Date.
General settings
¤
Select your time zone in the
area. The time zone spec-
Offset (hh:mm)
ifies the difference between standard
time (not summer time) and Coordi-
nated Universal Time (UTC). This infor-
mation is relevant for time-dependent
operations in the Internet.
84
Normal
or Outdoor.
Time Zone
¤
If a distinction is made between sum-
mer and standard time in your time
zone, you must activate the
in the
Daylight Saving Time
the time switches to summer time, or
the
option when the time switches
Off
to standard time.
¤
In the
Time Display Mode
whether you wish the time to be dis-
or
played in 12 or 24-hour mode.
¤
Click on Apply.
Setting the date and time manually
¤
Click on the
¤
Enter the time and date in the
Time (hh:mm)
fields.
If you wish to display the time in
12-hour mode
page 84), you should also select
(for morning) or
a.m.
noon).
Note:
You can set the display format for the date
("day/month/year" or "month/day/year") on the
handset, see page 67.
Copying the date/time automatically from
the SNTP server
¤
Click on the
¤
Enter the IP address/name of the time
server in the
The time and date are automatically
updated by the time server.
Notes:
– If you set the date and time on the handset,
these settings will be overwritten during
the next synchronisation with the time
server.
– If the date and time are updated by a time
server, find out if the time server already
takes into account the time deviation from
Coordinated Universal Time and summer
time. In this case, you must enter 00:00 in
Time Zone Offset (hh:mm)
Daylight Saving Time
On
option
area when
area, specify
option.
Manual
Local
and
"Date (day, month, year)"
(Time Display
Mode,
(for the after-
p.m.
SNTP
option.
SNTP Server Address
and deactivate
.
field.
Advertisement
Table of Contents
