Table of Contents
Advertisement
Creating/managing access profiles
Entering profile names
Requirement: You are editing an access
profile.
The profile name is displayed in the profile
overview. By default, the profiles are num-
bered (profile 1 to 16). You can change
the profile names.
Note:
Choose descriptive profile names from which
you can recognise the WLAN and SIP settings
for which the profile is valid, e.g.
"Anna_Office". This will make it easier to select
a profile from the profile overview.
Profile name
Enter any name (max. 32 characters).
¤
If required, edit the WLAN/provider set-
tings and save the changes.
Editing the "WLAN settings"
profile area
Requirement: You are editing the
profile area (page 59).
¤
Make an entry on several lines
(page 120):
The number of input fields varies accord-
ing to the current selection.
SSID
Enter the SSID
Authentication
Select
/
None
802.1x
required, set authentication and
encryption (page 62).
Note:
You only have to make security settings if you
wish to obtain access to a secure WLAN.
Encryption Type
(You have set
None
tion.)
Select
None
/
WEP 64
and, if required,
WPA PSK TKIP
set up encryption (page 63).
62
WLAN
/
and if
WPA
/
as
802.1x
Authentica-
/
WEP128
/
DHCP
Select
/ Off. If you disable DHCP, you
On
must specify the handset's IP address
manually (see "Specifying the IP
address manually", page 62). It is rec-
ommended that you enable DHCP.
¤
Save changes (page 121).
Specifying the IP address manually
Requirement: DHCP is disabled. Addi-
tional input fields are displayed.
¤
Make an entry on several lines
(page 120):
Gateway
Enter the gateway's IP address. This is
generally the local IP address of your
WLAN router (IP address within the
WLAN).
Subnet Mask
Enter the subnet mask.
IP Address
Enter the handset's IP address.
¤
Save changes (page 121).
Setting authentication and encryption
Requirement: You are editing the
profile area (page 59).
Notes:
– The security settings for the handset must
agree with the settings at the access point.
– For more information on the individual
parameters, see page 17.
Input structure on the handset
The number of input fields varies accord-
ing to the current setting for
tion:
Authentication
None
802.1x
WPA
WLAN
Authentica-
Possible encryption
WEP (page 63)
WPA PSK (page 63)
WEP (page 63)
WPA PSK (page 63)
WPA (page 63)
Advertisement
Table of Contents
