Table of Contents
Advertisement
Creating/managing access profiles
Making additional SIP settings
¤
For
Authentication
No
if the
Authentication Name
entered for authentication with the SIP
provider.
¤
Enter the name of your provider's secu-
rity domain (SIP realm) in the
field. This is often the same as the
name of the SIP proxy server.
¤
Open the
Transport Protocol
select the UDP,
TCP
Which protocol you can use depends
on your SIP provider.
– The
transmission protocol is
UDP
slower during troubleshooting.
UDP
shouldn't be used if you have
manually assigned the handset's
IP address and have defined a
Primary DNS IP Address
DNS IP Address
– Transmission protocols
offer quicker and more reliable
transmission.
Saving the access profile and exiting
the profile wizard
¤
If relevant, click on
the handset is to use the newly created
access profile immediately.
¤
Click on Finish. The access profile is
saved on the handset.
The profile wizard is concluded. To create
another access profile, start the profile
wizard again (page 91).
If you have clicked on
the handset establishes a connection to
the WLAN/SIP provider of the new profile.
The connection to the Web configurator is
terminated.
Caution:
If the network name (SSID) set for the new
access profile is different from the SSID on your
PC, the connection between the PC and hand-
set can only be restored if you set the same
SSID on the PC.
96
Required, click on
Yes
has to be
Realm
list and
or
protocol.
TLS
/
Secondary
(page 92).
and
TCP
TLS
Activate this profile
Activate this
profile,
Creating/editing the access
/
profile via the Admin menu
You can create and edit access profiles in
the
menu. Here, you can make set-
Admin
tings that are not possible in the profile
wizard. These additional settings are not
necessary for basic operation.
Caution:
Only change the additional settings if you
have received corresponding information from
your SIP provider or if login to the WLAN
requires special settings.
¤
Open the following Web page:
¢
Admin
If you have already saved access profiles, a
list with the most important settings is dis-
played (s. Figure 3).
Using functions in the Admin menu
Several functions are available to you in
the navigation area for creating or editing
an access profile.
Calling up a function/opening Web page
if
There are two ways in which you can
switch between the Web pages of an
access profile:
u
Via the Apply button. The changes are
saved in the handset. The Web pages
are opened one after the other.
u
Via the navigation area:
¢
Admin
¢
(Create new access profile / Edit
access profile from list)
Name
/
IP Addresses
WLAN Security
Caution:
Save your changes before you leave a Web
page. If you switch to a different Web page via
the navigation area, unsaved changes will be
lost.
¢
Network
Profile
Selection.
¢
Network
Profile Selection
¢
Profile
/
IP Routing
/
SIP
/
SIP advanced
/
WLAN
/
Advertisement
Table of Contents
