Restoring The Handset Default Settings; Setting The Base; Repeater Support; Protecting Against Unauthorised Access - Gigaset E260 Manual

Setting the base

Restoring the handset
default settings
You can reset any individual settings
and changes that you have made.
This will not affect entries in the
directory, calls list, date and time or
the handset's registration to the
base.
¤ q Settings ¤
§Menu§
¤ q Handset ¤
¤ q Reset Handset ¤
¤ Reset? ¤
§OK§
Cancel the reset with a.
Setting the base
The base settings are made via regis-
tered handset.

Repeater support

You can increase the range and sig-
nal strength of the base using a
repeater. You will need to activate
repeater mode. This will terminate
any calls that are in progress at the
time.
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q Additional
¤ q Repeater
¤
§OK§
¤
§OK§
(´= activated)
After activating or deactivating the
repeater, switch your handset off
42
§OK§
§OK§
§OK§
§OK§
and on again (¢ page 19).
Please note
u Eco Mode / Eco Mode+
(¢ page 34) and repeater sup-
port cancel each other out, i.e.,
if you use a repeater, you can-
not use Eco Mode or Eco
Mode+.
u The default encrypted trans-
mission setting is deactivated
when repeater mode is acti-
vated.
Protecting against
unauthorised access
Protect the system settings of the
base with a system PIN known only
to you. You will need to enter the
system PIN when, for example, regis-
tering/de-registering a handset to/
from the base.
Changing the system PIN
You can change the base's 4-digit
default system PIN ("0000") to a 4-
digit PIN known only to yourself.
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q System PIN ¤
¤ PIN: (Enter current system PIN)
¤ ¤ New PIN: (Enter new
§OK§
system PIN) ¤
§OK§
§OK§
§OK§