Inserting The Batteries - Siemens Gigaset 200 User Giude

G
!
G
G
Step 2: Put the handset into operation

Inserting the batteries

G Insert the batteries with the correct polarity – see
figure.
G
Put the lower end of the battery compartment cover
in position (see arrow), and press against the
_ribbing at the top until it engages.
G
To open it, lift the cover by the ribbing.
G
!
G
Use only the plug-in power supply unit
provided, as indicated on the bottom of
the base unit.
Important: new phone cable. Use only the
enclosed cable type.
If you purchase another cable, ensure that it
has the correct connector pin assignment.
The display is protected by a plastic foil.
Please remove the protective foil.
Use only approved, rechargeable batter-
ies of the same type. Otherwise you risk
damaging your health and the product.
Do not use charging units belonging to
other devices because they could damage
the batteries.
7