Settings of the base unit
8
Normally, no changes are necessary to set-
tings in the base unit.
Settings in the base unit can be easily
changed by using the mobile part if necessary.
Prerequisite:
The handset must be registered with the base
unit.
Signaling method
You use this function to change to the pulse signaling
method.
Factory default: Multifrequency signaling method.
3
DIAL MODE
PULSE
or
TONE
8
If you hold down the
cally have multifrequency signaling for the
subsequent call.
18
Press the off-hook key.
The following appears on the
display
Open the menu.
Confirm.
Select and confirm your desired
signaling method.
Select and confirm.
Press the on-hook key
.
"
"
4
key, you automati-