Table of Contents
Advertisement
General
Display key for cancelling functions/
returning to the next menu level up.
On-hook key for ending calls or for cancelling
functions and returning to the "on" status
immediately.
The currently selected (highlighted) function is displayed
on a dark background.
A dotted line indicates the end of the menu. If you scroll
further, the first function in the menu is selected again.
When the "line" is selected, press the
to jump back to the higher-level menu or to the "on" status
display.
Function selection via codes
(switching functions)
Most switching functions, for example, the callback or shut-
tle functions, can be executed using codes.
You will find an overview of all executable functions on page
28.
13
Putting the mobile unit into service
.
Inserting batteries into the mobile unit
Note:
Read the safety instructions on page 2 first!
Only use the supplied or permitted batteries, do not
use normal batteries (non-rechargeable) – see page
16.
Hold the mobile unit with the dialling keypad facing
downwards (see Figure 2). A battery compartment for
2 batteries is located in the lower part of the mobile unit.
display key
To open the battery compartment, slide the lid upwards in
the direction of the arrow (see Figure 2).
Insert the two batteries supplied in the battery compar t-
ment as shown in Figure 2.
Ensure that the batteries are inserted correctly (polarity
illustrated on the label in the battery compartment).
The battery compar tment cannot be closed if batteries
are inserted incorrectly!
Slide the lid of the battery compartment downwards into
the grooves on the mobile unit (see Figure 2) until the lid
is secured in place.
Fig. 2: Rear of mobile unit, battery compart. open
14
Putting the mobile unit into service
Charging and using the batteries
The batteries supplied (NiCd) are not charged.
To charge the batteries, insert the mobile unit in the Gigaset
2000L charging shell. The mobile unit can be inserted with
the display facing upwards or downwards.
The LED
on the charging shell lights up while the bat-
teries are charging. In addition, the battery symbol in the
mobile unit display indicates the charging status:
Batteries empty.
Batteries charged 33%.
Batteries charged 66%.
Batteries charged 100%.
Note:
New batteries should be initially charged for a mini-
mum period of 16 hours without interruption – irre-
spective of the battery symbol displayed!
In order to maintain max. battery storage capacity
for as long as possible, the mobile unit should only
ever be inserted in the charging shell when the batter-
ies are almost empty
.
The batteries warm up during charging.
Old, defective batteries must be disposed of in accord-
ance with legal requirements, not in the normal waste
disposal system.
Battery charging times:
Charging time in
Type
mobile unit
(hours)
NiCd
4-5
NiMH, 1100 mAh
8-9
15
Loading time in
reserve battery
compar tment
(hours)
24
40
Hide quick links:
Advertisement
Table of Contents
